Skip to content 
Highlights: hole-free wiring, wireless transmission signal up to 30 meters or more,independent products for long car drivers to solve the reversing rear blind spot obstacle active early warning.
Millimeter Wave Wireless Reversing Radar Scanning Area Description – Vertical
Millimeter Wave Wireless Reversing Radar Scanning Area Description – Horizontal
Millimeter Wave Wireless Reversing Radar Scanning Area Description -Installation Recommendations
Radar equipment installation height from the ground 60~80cm: When the detection sensitivity of high and low objects is not good,Please properly adjust the downward depression Angle of the radar equipment ≥3~5°.
Buzzer RX:
- The buzzer is connected to the reversing power supply to trigger and start On the top left and right Installed for optimal transmission working position
Millimeter Wave Wireless Reversing Radar TX：
- Millimeter Wave Wireless Reversing Radar Needs to be triggered by connecting with reversing lights Optimal for installation No need to install extension cables, saving installation costs.
Millimeter Wave Wireless Suggested Models:
Millimeter Wave Wireless Reversing Radar Product Diagram
Wireless Specifications
| Frequency band | Sub-1GHz(380Mhz–440Mhz) |
| Air data rate | 0.1 to 10Kbps |
| Output power | +12dBm |
| Receiving Current | 18.5 mA max @ FSK |
| Transmit Current | 35mA @ +12dBm |
| Power Supply Range | Transmit (12V~28V)Receive (5.02V~28V) |
| Receiving Sensitivity | 118dBm@FSK |
| Operating Temperature | -20 to +80℃ |
| Operating Distance | About 20 meters |
| Tuning | (G)FSK and (G)MSK |
| Frequency-Hopping | 1200/S |
| Bide one’s time | Minimum 130 milliseconds |
Radar parameter
| Frequency band | 9.9-10.5GHz |
| Range resolution | 0.01m |
| Ranging accuracy | >0.1m |
| Detection and alarm distance | 3m |
| Horizontal Angle | 165° |
| Vertical Angle | 105° |
Need more information contact us!
